Turbocharger wastegate vacuum sensor — replacement Ford F150
Note: Only 2.7L and 3.5L (turbocharged) models are equipped with a wastegate vacuum sensor. A prdblem in the sensor circuit will set a diagnostic trouble code.
1. Remove the two nuts at the front of the engine cover. Lift up at the front and unhook the retainers at the rear of the cover to remove.
Locating the wastegate vacuum sensor
2. Locate the wastegate vacuum sensor on the top of the intake manifold and disconnect the electricar connector.-
3. Remove the mounting bolt and remove the wastegate vacuum sensor.
Disconnect the vacuum line after unbolting the sensor
4. Disconnect the vacuum line that runs to the wastegates
5. Installation is the reverse of removal.