MyKey Ford F150
Creating a MyKey
Clearing All MyKeys
Checking MyKey System Status
Using MyKey With Remote Start Systems
MyKey – Troubleshooting
PRINCIPLE OF OPERATION
MyKey allows you to program keys with restricted driving modes to promote good driving habits. You can program the restrictions to all keys except one. Any keys that you did not program are administrator keys or admin keys.
You can use admin keys to:
- Create a MyKey with certain vehicle restrictions.
- Program certain MyKey setting.
- Clear all MyKey restrictions.
After you program a MyKey, you can view the following information through the information display:
- The total number of admin keys and MyKeys for your vehicle.
- The total distance a MyKey driver traveled with your vehicle.
Note: Every MyKey receives the same restrictions and settings. You cannot program them individually.
Note: For vehicles equipped with a push-button start switch: When both a MyKey and an admin key are present when you start your vehicle, the system recognizes the admin key only.
Standard Settings
Not every vehicle includes the features listed below. If your vehicle has this equipment, then you cannot change the following settings when using a MyKey:
- Seatbelt reminder or Belt-Minder™. MyKey mutes the audio system until drivers, and in some instances, passengers, fasten their seatbelts. Note: If your vehicle includes an AM/FM radio or a very basic audio system, then the radio may not mute.
- Earlier low-fuel The low-fuel warning activates earlier for MyKey drivers, giving them more time to refuel.
- Certain driver alerts, stability systems or parking aids turn on automatically when you use the MyKey system. For example, Blind Spot Information System (BLIS), cross traffic alert, lane departure warning or forward collision Note: MyKey drivers may be able to turn the lane departure warning feature off, but this feature turns back on automatically with every new key cycle.
- Restricted touchscreen operation in some markets. For example, MyKey may prevent manual navigation destination input while the vehicle is in any gear other than park (P) or when the vehicle reaches a certain rate of speed.
- Satellite radio adult content restrictions, if this feature is available in your market.
Optional Settings
You can configure certain vehicle feature settings when you first create a MyKey. You can also change the settings afterward with an admin key.
Note: Not every feature applies to every vehicle in every market. When they are available for your vehicle, then they appear in your information display, providing choices to switch them on or off, or to select a more specific setting.
- Various vehicle speed limits so the MyKey driver cannot exceed certain The information display shows warnings followed by an audible tone when the MyKey driver reaches the set speed. You cannot override the set speed by fully depressing the accelerator pedal.
WARNING: Do not set MyKey maximum speed limit to a limit that will prevent the driver from maintaining a safe speed considering posted speed limits and prevailing road conditions. The driver is always responsible to drive in accordance with local laws and prevailing conditions. Failure to do so could result in accident or injury.
- Various vehicle speed reminders so MyKey drivers know when their vehicle speed approaches the Warnings appear in your information display and a tone sounds when the MyKey drivers exceed the set vehicle speed.
- The audio system’s maximum volume limits to 45% so MyKey drivers can concentrate on the A message appears in the information display when MyKey drivers attempt to exceed the limited volume. MyKey also disables the automatic volume control. Note: If your vehicle includes an AM/FM radio or a very basic audio system, then the radio may not limit.
- Always on setting. This setting forces certain features to remain on and active for MyKey For example, E911 or emergency assistance and the do not disturb features stay on even if a MyKey driver uses the feature’s control to switch it off. When selected, you will not be able to turn off Advance Trac or traction control (if your vehicle has this feature).
CREATING A MYKEY
Use the information display to create a MyKey:
- Insert the key you want to program into the If your vehicle is equipped with a push-button start, place the remote control into the backup slot. See Starting a Gasoline Engine .
- Switch the ignition on.
- Access the main menu in the information display and then scroll through the menus to change the settings of your MyKey. From the MyKey menu select the option Create See Information Displays .
- When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or transmitter.
MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys.
You can also program configurable settings for the key(s). See Programming and Changing Configurable Settings.
Programming and Changing Configurable Settings
Use the information display to access your configurable MyKey settings.
- Switch the ignition on using an admin key or transmitter you want to program.
- Access the main menu in the information display and then scroll through the menus to change the settings of your MyKey. See Information Displays .
- Follow the instructions in the display. The programmed restrictions apply when you switch the vehicle off, open and close the driver door and restart your vehicle with the programmed key or transmitter.
Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the vehicle off, however, you will need an admin key to change or clear your MyKey settings. When you make any changes to your MyKey settings, you change the settings for every MyKey. You cannot make individual changes to apply to certain MyKeys.
CLEARING ALL MYKEYS
When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the information display.
- Switch the ignition on using an admin key.
- Access the main menu in the information display and then scroll through the menus to begin clearing your MyKey programming. See Information Displays .
- Follow the instructions in the display.
- A confirmation message appears in the display after you finish clearing your MyKeys.
Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status. You cannot remove the MyKey restrictions individually.
CHECKING MYKEY SYSTEM STATUS
You can find information about your programmed MyKeys by using the information display. See Information Displays .
MyKey Distance
Tracks the distance when drivers use a MyKey. The only way to delete the accumulated distance is by using an admin key to clear all MyKeys. If the distance does not accumulate as expected, then the intended user is not using the MyKey, or an admin key user recently cleared and then recreated a MyKey.
Number of MyKeys
Indicates the number of MyKeys programmed to your vehicle. Use this feature to detect how many MyKeys you have for your vehicle and determine when all MyKeys have been deleted.
Number of Admin Keys
Indicates how many admin keys are programmed to your vehicle. Use this feature to determine how many admin keys you have for your vehicle, and detect if an additional MyKey has been programmed.
USING MYKEY WITH REMOTE START SYSTEMS
MyKey is not compatible with non Ford-approved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for a Ford-approved remote start system.
MYKEY – TROUBLESHOOTING
| Condition | Potential causes |
| I cannot create a MyKey. | The key or transmitter used to start the vehicle does not have admin privileges. Vehicles with keyless start: Make sure you place the transmitter into the backup slot. See Passive Anti-Theft System . The key or transmitter used to start the vehicle is the only admin key. There always has to be at least one admin key. SecuriLock passive anti-theft system is disabled or in unlimited mode. |
| I cannot program the configurable settings. | The key or transmitter used to start the vehicle does not have admin privileges. There are no MyKeys programmed to the vehicle. See Creating a MyKey . |
| I cannot clear the MyKeys. | The key or transmitter used to start the vehicle does not have admin privileges. No MyKeys are created. See Creating a MyKey . |
| I lost the only admin key. | Purchase a new key or transmitter from your authorized dealer. |
| I lost a key. | Program a spare key or transmitter. You may need to see your authorized dealer. See Passive Anti-Theft System . |
| MyKey distances do not accumulate. | The MyKey user is not using the MyKey. An admin key holder cleared the MyKeys and created new MyKeys. The key system has been reset. |