Transmission Control Module (TCM) (10-speed transmission) — replacement Ford F150

Note: On 6-speed transmissions, the PCM controls transmission operation.

Note: The TCM is located on a bracket attached to the passenger frame rail under the cab.

1. Slide the connector lock tab away from the TCM to disengage.

2. Pull the connector straight off of the TCM or damage to the terminals may occur.

3. Remove the three nuts attaching the TCM to the frame.

4. Installation is reverse of removal.

Note: If a new module is installed, module configuration must be restored and solenoid body strategy must be entered by a qualified repair center.

  • Pages

    Open all | Close all