Cowl covers — removal and installation Ford F150
1. Remove the windshield wiper arms (see Windshield wiper system – check and component removal and installation).
2. Starting with the left side, release the upper cowl clips (see illustrations).
.2a Using a small screwdriver, release the clips along the front of the cowl
.2b Left side cowl clip locations
3. Lift the upper cover up to disengage the retaining clips at the rear, then disconnect the windshield washer hose (see illus tration).
.3 Lift up the cover and disengage the rear retaining clips (1), then disconnect the washer hose (2)
4. Remove the pushpins and outer screw on the left side cowl cover (see illustration), then remove the lower cowl cover.
.4 Remove the pushpin fasteners and outer screw, then lift the lower cover from the cowl
5. Release the clips securing the right side cowl upper cover (see illustration).
.5 Release the clips at the front edge of the right side cowl cover
6. Lift the upper cover up, making sure to disengage the clips at the rear, and disconnect the windshield washer hose (see illustration).
.6 Disconnect the washer hose from the right side upper cowl cover
7. Remove the pushpins and outer screw on the right side lower cowl cover (see illustration), then remove the cover.
.7 Remove the pushpin fasteners and outer screw, then lift the lower cover from the cowl
8. Installation is the reverse of removal.