Air conditioning and heater blower/control module — replacement Ford F150

Note: The blower motor and the blower mo­tor speed control module have been combined into one assembly called the blower motor control module.

1. Disconnect the cable from the negative battery terminal (see Engine electrical systems).

2. Remove the passenger’s side lower trim panel plastic push-pins and panel.

3. Remove the passenger’s side kick-panel (see Body).

4. On 4WD models, remove the transfer case control module (TCCM) (see Transfer case).

Ford F150 Cooling, heating and air conditioning systems_Air conditioning and heater blower/control module - replacement_Disconnect the electrical connector from the blower motor control module (1), then remove the mounting screws (2)

Disconnect the electrical connector from the blower motor control module (1), then remove the mounting screws (2)

5. Disconnect the electrical connector from the blower motor module (see illustra­tion).

6. Remove the blower motor/control module screws and separate the module from the housing.

7. Installation is the reverse of removal.

  • Pages

    Open all | Close all