Intake Air Temperature (IAT) sensor — replacement Ford F150

Note: Only 2.7L and 3.5L turbocharged models are equipped with an Intake Air Temperature (IAT) sensor.

Ford F150 Emissions and engine control systems_Intake Air Temperature (IAT) sensor - replacement _ Location of the IAT sensor (2.7L model shown)

Location of the IAT sensor (2.7L model shown)

1. The Intake Air Temperature (IAT) sensor is located on the intake air tube between the air filter housing and the air inlet ducts.

2. Disconnect the electrical connector, then rotate the IAT sensor counterclockwise to release it from the intake air duct.

3. Installation is reverse of removal.

  • Pages

    Open all | Close all