Fuel level sending unit — replacement Ford F150
Warning: Gasoline is extremely flammable, so take extra precautions when you work on any part of the fuel system. See the Warning in Fuel pressure relief procedure.
1. Remove the fuel pump module (see Fuel pump/fuel pump module – removal and installation).
2. Remove the electrical connectors for the fuel level sending unit.
Depress the tab and slide the fuel level sending unit off
3. Press the tab to release the fuel level sending unit from the fuel pump module.
4. Installation is the reverse of removal. Be sure to install a new rubber gasket on the fuel pump module.
5. Turn the ignition on and check for leaks.